Airbus blamed a combination of manufacturing and design flaws for wing cracks on its A380 superjumbo but said it had found a simple solution to the problem, easing concerns among analysts who had feared the issue could dog the European plane-maker.

In unusually frank remarks, a top Airbus executive said it had established how to repair the cracks found on a small number of parts inside the A380's wings, which had prompted European safety authorities to order inspections last week.

Airbus and one of the leading operators, Singapore Airlines, also confirmed a Reuters report that more examples of the cracks had been found during compulsory inspections.

Airbus moved to shore up confidence in the world's largest jetliner amid a drip-feed of disclosures about cracking on components used to fix the outside of the wing to its ribcage.

"The A380 is safe to fly," said Tom Williams, executive vice president of programmes at Toulouse-based Airbus.

Williams flew to Dublin to give an unscheduled address at an industry conference to dampen any concerns about safety.

Crucially, he said engineers had ruled out metal fatigue on the youthful aircraft which first entered service in 2007.

Unusually detailed briefings marked a different response from the blowout of an engine on a Qantas A380 in Nov. 2010 when engine maker Rolls-Royce was criticized by the industry and investors for not giving enough information.

"This is a game-changer in getting out information that in the past we weren't told. You can't dismiss these things, but it is not a serious issue and they have a solution at hand," said Howard Wheeldon, senior strategist and aviation specialist at brokerage BGC Partners.

The cracks have tested morale at EADS subsidiary Airbus just as it recovers from years of production delays, having hit its A380 delivery target for the first time in 2011.

The mammoth double-decker was conceived as a European bid to outdo the Boeing 747, but became mired in development problems that caused a near-riot in the French parliament and a rift between France and Germany.

BGC's Wheeldon said engineering flaws rarely affected the contest between Airbus and Boeing in the $100 billion jet market, which is determined more by fuel economy, performance and delivery timescales.

Trio of Mistakes

Developed at an estimated cost of EUR12 billion in Britain, France, Germany and Spain, the A380 has room on its wingspan of 79.8m (261ft 10in) to park 70 cars.

Airbus has sold 253 of the long-range aircraft, listed at US$390 million each, and 68 A380s are currently in service.

It blamed the cracks on three errors - designers' choice of aluminium alloy for some of the 4,000 brackets inside the wings, the use of a type of bolt that strained the metal and a way of closing tiny gaps that put more stress on a handful of parts.

European authorities have ordered inspections on almost a third of the superjumbo fleet, or 20 aircraft, after two types of cracks were discovered within weeks of each other.

Airbus officials said that having understood the problem, they expected most of the aircraft being tested to show similar evidence of cracks and that it had found a simple repair.

Singapore Airlines said it had found cracks on all four aircraft it had inspected so far. One had already been repaired with a change of brackets and was back in service, while another was due to return to the air on Friday. Inspections of two final A380s were due to begin late on Friday.

A spokesman for Australia's Qantas said the airline was not required to inspect any of its 12 A380s in operation and did not plan to do so. It did not expect any delays to two more A380s due for delivery in early 2013.

The Qantas A380s are relatively young with half of them joining the fleet between late 2010 and late 2011. Flying some of the world's longest routes out of Australia, the Qantas A380s spend more time in the air but make fewer takeoffs and landings than competitors, reducing the strain on the parts in question.

"It seems to me this is part of the growing pains which new aircraft types can experience," said Stephen Furlong, airline analyst at Davy Stockbrokers in Dublin.

"Obviously the negative publicity is not at all helpful. The real problems start when airlines have to ground planes because they are not comfortable with safety issues, which are clearly paramount to an airline's brand. But we're nowhere near that yet with the A380."

Some passengers at European airports earlier this week expressed concern about the cracks while others said they were happy to trust safety inspectors. Airlines have not so far reported any falls in bookings.

Airbus last week dismissed calls by an Australian engineering union for A380s to be grounded.

The cracks first came to light during repairs, lasting over a year, on the Qantas A380 involved in an engine blowout. Supersonic shrapnel tore through the wing and left it resembling what an Airbus official has described as anti-aircraft fire.

At first engineers were unsure what had caused the rib cracks but the initial microscopic flaws led to the discovery of a second and potentially more serious type of crack, some of them up to two inches long, in the central part of the wing.

Executives at a Dublin aviation event said the pace of revelations had provided a need for clarification.

"When they had the second round of cracks, that got more people's attention and a few airlines were asking questions," an executive said, asking not to be identified.

The findings caused concern at the European Aviation Safety Agency which turned down Airbus's request for limited extra time to examine the data and ordered mandatory inspections last week.

The wing is made of both aluminium, the metal used to build aircraft for decades, and carbon composites used in new jets.

Airbus is changing a manufacturing processes to ensure smooth operation until at least the next four-year check-up.

Longer term, it plans to switch to a different alloy, restoring the aircraft to its normal lifespan of 25 years-plus.

The wings were designed and built in Britain, which prides itself on state-of-the-art wing assembly. Unions there recently complained about the outsourcing of some work to South Korea.